Table of Contents
Advertisement
3.1.2 Network Mode
To set the network mode, perform the following steps:
1. Choose Network >WAN Settings;
2. In the Network Mode area, select a mode between BRIDGE and NAT;
3. Click Submit. As shown in Figure 3‐2.
3.2 LTE Settings
3.2.1 Viewing Module Information
To view the mobile module information, perform the following steps:
1.
Choose Network > LTE Settings;
2.
In the Module Information area, you can view the information about the module, such as
module model, module version, IMEI. As shown in Figure 3‐3.
Figure 3‐1
Figure 3‐2
Advertisement
Table of Contents
