Set Syslog Add Server - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
alerts
critical
errors
warnings
notifications
informational
debugging
Guidelines
After a level is selected, alarms whose level is lower than the selected level can be sent.
Alarms whose level is higher than the selected level are filtered.
Default
The default configuration is level 7.
Example
The following example sets the level of syslog information to 7 (normal information):
zte(cfg)#set syslog level informational

4.22.3 set syslog add server

Purpose
This command sets a syslog server.
Command Mode
Global configuration mode
Syntax
set syslog add server <1-5 > ipaddress <A.B.C.D>[name <name>][<0-65535 >]
Parameter Description
Parameter
<1-5 >
<A.B.C.D>
<name>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Level 2, error to be corrected immediately
Level 3, critical error
Level 4, errors to be noticed
Level 5, warnings probably with some mistakes
Level 6, notifications to be noticed
Level 7, normal information
Level 8, debugging information
Description
ID of the syslog server to be set. A maximum of five syslog
servers can be set.
IP address of the syslog server.
Name of the syslog server.
4-414
ZTE Proprietary and Confidential