The following example sets the data source of the history group whose index is 10 to userx:
zte(cfg-snmp)#set history 10 datasource userx
The following example sets the buckerRequest of the history group whose index is 10 to
100:
zte(cfg-snmp)#set history 10 bucketRequest 100
The following example sets the owner name of the history group whose index is 10 to tom.
zte(cfg-snmp)#set event 10 owner tom
The following example sets the time interval of the history group whose index is 10 to 100s:
zte(cfg-snmp)#set history 10 interval 100
The following example sets the status of the history group whose index is 10 to invalid:
zte(cfg-snmp)#set history 10 status invalid
5.5.6 show rmon
Purpose
This command shows the RMON global configuration.
Command Mode
All configuration modes
Syntax
show rmon
Example
zte(cfg-snmp)#show rmon
Rmon is enabled.
5.5.7 show statistics
Purpose
This command shows the configuration of a statistics group or all statistics groups.
Command Mode
All configuration modes
Syntax
show statistics [<1-65535>]
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
5-35
ZTE Proprietary and Confidential