4.25.27 set ipport dhcp client request
Purpose
This command sets the information type distributed by the server when a DHCP client
interacts with the server.
Command Mode
Layer-3 configuration mode
Syntax
set ipport <0-63> dhcp client request {dns-server | domain-name | route | static-route | tftp-s
erver-name}
Parameter Description
Parameter
<0-63>
dns-server
domain-name
route
static-route
tftp-server-name
4.25.28 set ipport dhcp relay agent
Purpose
This command sets an IP port as a DHCP relay agent.
Command Mode
Layer 3 interface configuration mode
Syntax
set ipport <0-63> dhcp relay agent
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of a layer-3 port.
Requires the DHCP server to return the DNS server address.
By default, it is enabled.
Requires the DHCP server to return the domain name server
address. By default, it is enabled.
Requires the DHCP server to return the default route. By default,
it is enabled.
Requires the DHCP server to return the static route. By default, it
is enabled.
Requires the DHCP server to return the tftp server address. By
default, it is enabled.
4-447
Chapter 4 Service Configuration
ZTE Proprietary and Confidential