Zte ZXR10 2900E Series Command Reference Manual page 344

ZXR10 2900E Series Command Reference
Syntax
rule <1-500>{permit | deny} ipv6 udp {<source-ipv6addr><sipv6-mask>| any}[[source-port <0
-65535><sport-mask>]{<destination-ipv6addr><dipv6-mask>| any}[dest-port <0-65535><dpor
t-mask>][<vlan-id>]]
Parameter Description
Parameter
<1-500>
permit
deny
ipv6 udp
<source-ipv6addr>
<sipv6-mask>
any
source-port <0-65535>
<sport-mask>
<destination-ipv6addr>
<dipv6-mask>
any
dest-port <0-65535>
<dport-mask>
<vlan-id>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for IPv6 UDP packet. Other packets ignore
this rule.
IPv6 Source network or host of the transmitted package. The
standard IPv6 address format is used, such as abcd:EF12::123 4.
Source mask and used for source. It is expressed by an integer.
The range is 1 to 128.
Matches all source IPv6 addresses, source and source mask are
all 0s.
TCP source port number of the transmitted packet
The source-port parameter resolve some known port number.
Also the port number and mask can be entered.
Source port mask.
The destination network or host address of the transmitted IPv6
packet. The standard IPv6 address format is used, such as
abcd:EF12::123 4
Destination mask. It is used for destination and represented by
one integer. The value range is 1 to 128.
Matches all destination IPv6 addresses. The destination and
destination mask are all 0s.
TCP destination port number of the transmitted packet
The dest-port parameter resolve some known port number. Also
the port number and mask can be entered.
Destination port mask.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
4-284
ZTE Proprietary and Confidential