To remove an IPsec encryption policy from an interface, enter the no area area-id
encryption spi number command.
Related
ipv6 ospf encryption
Commands
interface.
show crypto ipsec policy
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-configuring the process.
Z9500
Syntax
clear ipv6 ospf [vrf vrf-name] process
Parameters
vrf vrf-name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
debug ipv6 ospf bfd
Display debug information and interface types for bidirectional forwarding detection (BFD) on OSPF IPv6
packets.
Z9500
Syntax
[no] debug ipv6 ospf bfd [interface]
Open Shortest Path First (OSPFv2 and OSPFv3)
– configures an IPsec encryption policy on an OSPFv3
– display the configuration of IPsec encryption policies.
(Optional) Enter the keyword vrf followed by the name of the
VRF to clear IPv6 routes corresponding to that VRF.
EXEC
EXEC Privilege
Description
Added support for VRF.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for C-Series.
Introduced on the E-Series.
1337