Dell Z9500 Command Reference Manual page 1320

Item
Timer intervals...
Hello due...
Neighbor Count...
Example
Dell>show ip ospf int
TenGigabitEthernet 1/7 is up, line protocol is up
BROADCAST, Cost: 1
192.168.1.2
address 192.168.1.1
Retransmit 5
Router)
TenGigabitEthernet 1/8 is up, line protocol is up
BROADCAST, Cost: 1
192.168.0.4
address 192.168.0.2
Retransmit 5
Router)
Loopback 0 is up, line protocol is up
LOOPBACK, Cost: 1
Loopback interface is treated as a stub Host.
Dell>
1320
Description
This line displays the interface's timer settings for Hello
interval, Dead interval, Transmit Delay (Wait), and Retransmit
Interval.
This line displays the amount time until the next Hello
packet is sent out this interface.
This line displays the number of neighbors and adjacent
neighbors. Listed below this line are the details about each
adjacent neighbor.
Internet Address 192.168.1.2/30, Area 0.0.0.1
Process ID 1, Router ID 192.168.253.2, Network Type
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.253.2, Interface address
Backup Designated Router (ID) 192.168.253.1, Interface
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 192.168.253.1 (Backup Designated
Internet Address 192.168.0.1/24, Area 0.0.0.1
Process ID 1, Router ID 192.168.253.2, Network Type
Transmit Delay is 1 sec, State DROTHER, Priority 1
Designated Router (ID) 192.168.253.5, Interface address
Backup Designated Router (ID) 192.168.253.3, Interface
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Hello due in 00:00:08
Neighbor Count is 3, Adjacent neighbor count is 2
Adjacent with neighbor 192.168.253.5 (Designated Router)
Adjacent with neighbor 192.168.253.3 (Backup Designated
Internet Address 192.168.253.2/32, Area 0.0.0.1
Process ID 1, Router ID 192.168.253.2, Network Type
Open Shortest Path First (OSPFv2 and OSPFv3)