Dell Z9500 Command Reference Manual page 1361

Defaults No default behavior or values.
Command
EXEC
Modes
EXEC Privilege
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.1.(0.0)
8.4.2.0
8.3.19.0
Usage
The show crypto ipsec sa ipv6 command output displays security
Information
associations set up for OSPFv3 links in IPsec authentication and encryption policies
on the router.
Related
show crypto ipsec policy
Commands
encryption policies.
Example
Dell#show crypto ipsec policy
Dell#show crypto ipsec sa ipv6
Interface: TenGigabitEthernet 0/0
Link Local address: fe80::201:e8ff:fe40:4d10
IPSecv6 policy name: OSPFv3-1-500
inbound ah sas
outbound ah sas
inbound esp sas
outbound esp sas
Interface: TenGigabitEthernet 0/1
Link Local address: fe80::201:e8ff:fe40:4d11
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the E-Series TeraScale.
Introduced on the S4820T.
– displays the configuration of IPsec authentication and
spi : 500 (0x1f4)
transform : ah-md5-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
spi : 500 (0x1f4)
transform : ah-md5-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
1361