Dell Z9500 Command Reference Manual page 1368

•
Command ROUTER OSPFv3 for OSPFv3
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.8(0.0)
Usage Setting the delay and holdtime parameters to a low number enables the switch to
Information an alternate path quickly but requires more CPU usage.
Example
Dell#conf
Dell(conf)#ipv6 router ospf 1
Dell(conf-ipv6-router_ospf)#timer spf 2 5
Dell(conf-ipv6-router_ospf)#
Dell(conf-ipv6-router_ospf)#show config
!
ipv6 router ospf 1
timers spf 2 5
Dell(conf-ipv6-router_ospf)#
Dell(conf-ipv6-router_ospf)#end
Dell#
1368
holdtime = 10 seconds
Description
Introduced on the S6000-ON, S6000, S4820T, S4810,
S5000.
Open Shortest Path First (OSPFv2 and OSPFv3)