Ipv6 Pim Bsr-Border - Dell Z9500 Command Reference Manual

Defaults none
Command EXEC Privilege
Modes
Command
Version
History
9.5(0.1)
9.0.2.0
9.0(1.3)
8.3.19.0
8.3.11.1
8.3.7.0
Related show ipv6 pim tib
Commands

ipv6 pim bsr-border

Invoke IPv6 PIM debugging.
Syntax
debug ipv6 pim [bsr | events | group group | packet | register
[group] | state | | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim command.
Parameters
bsr
events
group group
packet
register [group]
state
timer [assert |
hello |
joinprune |
register]
1404
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S5000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
– displays the IPv6 PIM tree information base (TIB)
(OPTIONAL) Enter the keyword bsr to invoke debugging of
IPv6 PIM Candidate RP/BSR activities.
(OPTIONAL) Enter the keyword events to invoke debugging
of IPv6 PIM events.
(OPTIONAL) Enter the keyword group then the group
address to invoke debugging on that specific group.
(OPTIONAL) Enter the keyword packet to invoke debugging
of IPv6 PIM packets.
(OPTIONAL) Enter the keyword register and optionally the
group address to invoke debugging of IPv6 PIM register
messages for a particular group.
(OPTIONAL) Enter the keyword state to view IPv6 PIM state
changes.
(OPTIONAL) Enter the keyword timer to view IPv6 PIM
timers. Enter one of the optional parameters:
• assert: to view the assertion timer
PIM-Sparse Mode (PIM-SM)