Dell S4810 Reference Manual page 1525

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
Information or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
Example
Dell#ssh 10.11.8.12 ?
-c
-l
-m
-p
-v
<cr>
Dell#ssh 10.11.8.12 -c ?
3des-cbc
Dell#ssh 10.11.8.12 -m ?
hmac-sha1
hmac-sha1-96 Force ssh to use hmac-sha1-96 HMAC algorithm
hmac-md5
hmac-md5-96
Dell#ssh vrf vrf1 10.10.10.2 -l admin
Security
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the -c and -m parameters on the S4810.
Introduced on the S4810.
Introduced on the S-Series.
Added IPv6 support. Introduced on the C-Series.
Introduced on the E-Series.
Encryption cipher to use (for v2 clients only)
User name option
HMAC algorithm to use (for v2 clients only)
SSH server port option (default 22)
SSH protocol version
Force ssh to use 3des-cbc encryption cipher
Force ssh to use hmac-sha1 HMAC algorithm
Force ssh to use hmac-md5 HMAC algorithm
Force ssh to use hmac-md5-96 HMAC algorithm
1525