Sflow Sample-Rate (Global) - Dell S4810 Reference Manual

Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Usage This command sets the counter polling interval for an interface.
Information
Related sflow polling-interval (Global)
Commands

sflow sample-rate (Global)

Change the global default sampling rate.
S4810
Syntax
sflow sample-rate value
To return to the default sampling rate, use the no sflow sample-rate
command.
Parameters
value
Defaults 32768 packets
1548
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on S-Series Stacking.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— globally sets the polling interval.
Enter the sampling rate value. For the C-Series and S-Series,
the range is from 256 to 8388608 packets Enter values in
powers of 2 only; for example, 4096, 8192, 16384, and so
on. The default is 32768 packets.
sFlow