Viewing Near End And Far End Pms; Select Near End Pms On The Performance Monitoring Screen; Figure 8-3 Near End And Far End Buttons On The Card View Performance Tab - Cisco ONS 15327 User Documentation

Using the Performance Monitoring Screen
To cancel changes, click Cancel. bsequent 24-hour period appears with a white background.
Step 4
8.1.3 Viewing Near-End and Far-End PMs
Select the Near End or Far End button depending on the PMs you wish to view. Only cards that allow
both near-end and far-end monitoring have these buttons as an option.
and Far End buttons on the Performance Monitoring screen.
Figure 8-3
Near end and
far end buttons
Procedure: Select Near-End PMs on the Performance Monitoring Screen
Open the electrical or optical card of choice. Double-click the card graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
Click the Near End button.
Step 3
Click the Refresh button. All PMs occurring for the selected card on the incoming signal are displayed.
Step 4
Cisco ONS 15327 User Documentation, R3.3
8-6
Near End and Far End buttons on the card view Performance tab
Chapter 8 Performance Monitoring
Figure 8-3 shows the Near End
June 2002