Refresh; Reload; Show Access-List - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
refresh
Usage Guidelines
reload
Usage Guidelines
show access-list
Syntax Description
Usage Guidelines
78-13124-05
Updates device information in the configuration manager.
refresh
Availability: Serial, Telnet; FIPS Mode (serial only)
Reboots the device.
reload
Availability: Serial, Telnet; FIPS Mode (serial only)
The device resumes operation using the startup-configuration stored in the flash
memory. You are prompted to confirm restarting the device.
Note
When reloading the device in FIPS Mode, the firmware
signature is verified.
Displays the specified access list for the device.
show access-list [listid]
listid
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not specify an access list id, information for all access lists is displayed.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The access list identifier.
Top Level Command Set
C-57
Advertisement
Table of Contents
Troubleshooting
