Show Ipv6 Mld Interface - NETGEAR ProSafe GSM7224P User Manual

The following table is displayed to indicate all the sources associated with this group.
Field Description
Source Address
The IP address of the source.
Uptime
Time elapsed in hours, minutes, and seconds since the source has been known.
Expiry Time
Time left in hours, minutes, and seconds before the entry is removed.
Example: The following shows examples of CLI display output for the commands.
(Switch) #show ipv6 mld groups ?
<group-address>
<unit/slot/port>
(Switch) #show ipv6 mld groups 1/0/1
Group Address.................................. FF43::3
Interface...................................... 1/0/1
Up Time (hh:mm:ss)............................. 00:03:04
Expiry Time (hh:mm:ss)......................... ------
(Switch) #show ipv6 mld groups ff43::3
Interface...................................... 1/0/1
Group Address.................................. FF43::3
Last Reporter.................................. FE80::200:FF:FE00:3
Up Time (hh:mm:ss)............................. 00:02:53
Expiry Time (hh:mm:ss)......................... ------
Filter Mode.................................... Include
Version1 Host Timer............................ ------
Group compat mode.............................. v2
Source Address ExpiryTime
----------------- -----------
2003::10 00:04:17
2003::20 00:04:17

show ipv6 mld interface

Use this command to display MLD-related information for the interface.
Format
show ipv6 mld interface [<unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
Enter Group Address Info.
Enter interface in unit/slot/port format.
IPv6 Multicast Commands
432