Incorrect Magnification
Phaser 6000/6010 and WC 6015 MFP
Incorrect magnification when copying with the ADF feeding.
Initial Actions
•
Check the paper transfer path.
•
Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
ADF Assembly, PL8.1.2
IIT Assembly, PL8.1.8
Troubleshooting Procedure Table
Step
Actions and Questions
1
Check the media being used and its
condition.
Is the media dry and
recommended?
2
Does the image print correctly?
3
Replace the ADF Assembly
(page 8-37).
Does the error persist?
Xerox Internal Use Only
Example Print
Magnification Incorrect
Yes
No
Go to step 3.
Replace with
dry, approved
media, then go
to step 2.
Complete.
Go to step 3.
Replace the IIT
Complete.
Assembly
(page 8-35).
Image Quality
5-37