Incorrect Magnification - Xerox Phaser 6128MFP Service Manual

Print-Quality Troubleshooting

Incorrect Magnification

Initial Actions
5-42
Incorrect magnification when copying with the ADF feeding.
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the paper condition.
2. Is the paper dry, recommended,
loaded in the correct position, and
meet the ADF specifications?
2 Is the ADF closed against the
document glass completely?
3 1. Perform Scanner Calibration
procedure ("Scanner Calibration"
on page 6-7).
2. Does the error still occur?
Example Print
Magnification Incorrect
Yes No
Go to step 2. Replace the
paper or use
the platen
mode.
Go to step 3. Close the ADF.
Replace the IIT Complete.
Sub-Assembly
(page 8-82).
Phaser 6128MFP Service Manual