Setting The Fax/Tad Answer Mode - Xerox WorkCentre Pro 575 Advanced Features Manual

Receiving Documents
3-4
3. Using the Numeric Keypad, enter the number of times the phone
must ring before the machine answers, then press Enter .
Note: When the machine is set to auto answer and the set
number of rings occurs, the machine answers with a fax
signal tone and enters the Auto Receive mode.
4. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.

Setting the Fax/Tad Answer Mode*

With a telephone answering device (TAD) connected to your machine
you can record voice messages and receive documents unattended.
When this feature is enabled, switching between voice message
recording and fax receiving is performed automatically.
Note: If a fax tone is detected during or after the Answering
Machine message, the machine automatically switches to
Fax Receiving Mode.
To set the Fax/Tad answer mode:
1. Press:
Menu
* Not available in all markets.
Answer mode
1.Fax
2.Fax/Tad
3.Tel/Fax
4.Manual
WorkCentre Pro 555/575