After Disassembling The Fixing Unit - Canon iR C3200 Series Service Manual

Chapter 11
F-11-193
F-11-194
4) Remove the delivery lower guide [1] from the front/
rear side plate.
F-11-195
Point to Attaching When the Delivery Lower
11-56
Guide
When mounting, be sure to set the spring [1] on either
end of the delivery lower guide as indicated.
F-11-196
F-11-197
11.5.12.7 After Disassembling
the Fixing Unit
If you have loosened the adjusting screw used to
secure the upper frame and the lower frame of the
fixing unit in place (as when replacing a roller), be
sure to adjust the nip of the fixing roller as follows:
1) Turn the adjusting screw [1] at the front/rear so that
the length of the pressure spring is 31.5mm.
0000-5109