E202 Error Code Detail A Fault Has Occurred In Detecting The No. 1 Mirror Home Position; E202-0000 Error Code - Canon iR C3200 Series Service Manual

16.3.10.35 E202 Error code detail A fault has occurred in detecting the No. 1
mirror home position.
Symptom
E202 A fault has occurred in detecting the No. 1 mirror home position. (Error code detail)
Description
Detail
0000
0001

16.3.10.36 E202-0000 Error Code

Symptom
E202-0000 Error Code
Description
E202-0000 is displayed when the optical home position sensor (SR2) does not go ON within a specific period
of time.
Cause
There is a case in the field that unplugging/reinserting the connector on the interface PCB solved the problem.
Field Remedy
Check whether the optical home position sensor (SR2) operates normally in service mode [COPIER>I/O>R-
CON>P004>bit5].
If there is no problem with the sensor (SR2), unplug and insert the connectors on the interface PCB (J301, J305,
J306, J309, J311).
T-16-11
Description
The No. 1 mirror base moves in
reverse but does not move to its home
position.
The No. 1 mirror base moves forward
but does not move from its home
position.
Timing of detection
The home position sensor does not
go ON within a specific period of
time.
The home position sensor does not
go OFF within a specific period of
time.
Chapter 16
0002-1639
0002-8538
16-139