Removing The Dc Controller Mounting - Canon iR C3200 Series Service Manual

Chapter 10
10.10.36.16 Removing the DC
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
F-10-320
10.10.36.17
Removing
Fixing Heat Discharge Fan
1) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the fixing heat discharge
fan [3].
F-10-321
10.10.36.18 Removing
Developing Drive Unit
1) Disconnect the connector [2] of the developing
motor [1], and free the harness [3] from the cable
clamp [4].
10-104
0000-4932
the
0000-4933
the
0000-4934
F-10-322
2) Remove the 2 screws [1], and detach the main
controller base [2].
F-10-323
3) Remove the 7 screws [1], and detach the
developing drive assembly [2].
F-10-324