E602 Error Code Detail The Hard Disk Is Faulty - Canon iR C3200 Series Service Manual

c-2-2. If you cannot enter service mode:
c-2-2-1. While pressing the numerical keys 1 and 9 simultaneously, turn the power ON. The recovery program
will automatically start and the LCD will go out.
c-2-2-2. Then, the LCD comes on, turn the power OFF/ON to make sure that the machine starts up normally.
c-2-2-3. If not, perform [HD-CLEAR] by selecting "1" and "2".
c-2-2-4. Reinstall the system software.
WM2-5210 HDD
FG3-2854 Main Controller PCB

16.3.10.85 E602 Error code detail The hard disk is faulty.

Symptom
E602 The hard disk is faulty. (Error code detail)
Description
Detail
0001
0002
0003
0005
0006
0007
01XX
02XX
03XX
Description
The fault may be a HD detection error, in which the HD
cannot be detected. The machine may fail to become ready
(returning an error code).
The startup file is absent. The program for the main CPU
does not exist on the HD, in BOOTDEV/BOOT or the like.
The fault is a HD write/abort error. The machine fails to read
sectors of the HD.
It is a fault in the detection of the HD controller IC. It is
detected when the HD controller IC cannot be recognized or
an error is detected in it.
The auxiliary startup file is absent. The correct SUB CPU
program does not exist on the HD or in BOOTDEV/BOOT
or the like.
The color profile file does not exist. The correct color profile
file does not exist in BOOTDEV/PDL or the like.
The partition DOSDEV is faulty.
(For detail code, see below.)
The partition PSTDEV is faulty.
(For detail code, see below.)
The partition DOSDEV2 is faulty.
(For detail code, see below.)
T-16-48
Timing of detection
Chapter 16
0002-1776
16-163