Fax Error Code - Canon iR C3200 Series Service Manual

Hide thumbs Also See for iR C3200 Series:

Table of Contents

16.3.12.2 ##281/##104 FAX Error Code

[ Manual-related ]

Field Remedy

##281: Displayed when the number of re-transmissions of the procedure signal has been exceeded.

##104: Displayed when RTN or PIN has been received.

Change the settings in the order designated below:

1. In service mode [FAX>#2MENU 007], set at '8'. If the symptom still recurs, in service mode [FAX>#1SSSW

SW17>bit1], set at '1' in order to extend the setting range for the transmission level higher than -7dB. Then,

change the transmission level again.

2. If the symptom still recurs, in service mode [FAX>#1SSSW SW03>bit4], set at '1' in order to prevent any

error occurrences caused by an echo.

3. If the symptom still recurs, in service mode [FAX>#1SSSW SW04>bit2], set at '1' so that the procedure

signal can be detected more easily by other party.

4. If the symptom still recurs, in service mode [FAX>#2MENU 005], set at '1' in order to activate the NL

16.3.12.3 ##796 FAX Error Code

[ Verified by Canon Inc. ]

##796 can be displayed when multiple sheets of A4R have been sent.

Field Remedy

This symptom has been corrected with System software Ver.9.05. If the machine you are servicing is earlier

than Ver.9.05, upgrade it to Ver.9.05 and later.

Show Quick Links

Table of Contents

Ir c3220n prt