Chapter 10
F-10-193
- When attaching the horizontal registration motor
support plate [1], be sure to bring the horizontal
registration motor support plate firmly in contact
with the grounding lead spring [2] found under the
guide plate.
- After replacement, check to make sure that the
sensor flag moves smoothly.
F-10-194
10.10.22.6
Removing
Horizontal
Motor
1) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the horizontal registration
motor [3].
10-74
the
Registration
0000-4887
F-10-195
10.10.23 Registration Sensor
10.10.23.1
Removing
Manual Feed Unit
1) Press the release button [1] on the machine's right
side to slide out the manual feed unit [2].
F-10-196
2) Remove the screw [1] and the stopper plate [2];
then, detach the manual feed unit [3].
the
0000-4956