E535 Error Code Detail There Is A Fault In The Swing Mechanism; E537 Error Code Detail There Is A Fault In Front Alignment - Canon iR C3200 Series Service Manual

16.3.10.68 E535 Error code detail There is a fault in the swing mechanism.

Symptom
E535 There is a fault in the swing mechanism. (Error code detail)
Description
Detail
0001
0002
0003
0004

16.3.10.69 E537 Error code detail There is a fault in front alignment.

Symptom
E537 There is a fault in front alignment. (Error code detail)
Description
Detail
Description
The swing motor (M7) or the
swing guide open sensor (PI18)
is faulty.
The swing motor (M7) or the
swing guide closed switch
(MS6) is faulty.
The safety area switch (MS3)
or the swing guide switch 2
(MS6) is faulty.
The swing motor (M7) or the
swing motor clock sensor
(PI20) is faulty.
Description
The front alignment motor
(M3) or the front aligning plate
home position sensor (S6) is
faulty. An excess load is
imposed on the front aligning
plate.
T-16-33
Timing of detection
The swing guide closed switch does not
go ON when the swing motor has been
rotated in reverse for 1 sec.
The swing guide open switch does not go
ON when the swing motor has been
rotated in reverse for 1 sec.
The swing guide closed switch is OFF
when the tray 1/2 is in the OFF position
of the safety area switch while the tray
ascent/ descent motor is in operation.
There is no clock pulse for 0.2 sec while
swinging operation is under way.
T-16-34
Timing of detection
The aligning plate fails to reach the
aligning plate home position sensor when
the rear alignment motor has been driven
for a specific period of time, or fails to
leave the aligning plate home position
sensor.
Chapter 16
0002-1706
0002-1709
16-153