COPIER>ADJUST>CCD>CL-R-GB
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>BW-R-RG
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>BW-R-GB
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>CCDU-RG
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>CCDU-GB
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>FCCDU-RG
Use it to enter a color displacement correction value
for sub scanning direction.
COPIER>ADJUST>CCD>FCCDU-GB
Use it to enter a color displacement correction value
for sub scanning direction.
6.4.4 Interface PCB
6.4.4.1
Removing
Copyboard Glass
1) Open the ADF or the copyboard cover.
2)
Points to Note When Removing the Copyboard
Glass
When removing the copyboard glass, take care not to
touch the surface of the glass or the white plate behind
it.
(The presence of dirt will cause lines in the images.)
If dirt is found, be sure to remove it using lint-free
paper moistened with alcohol.
the
0006-0814
Chapter 6
F-6-37
F-6-38
6-19