18.8 COUNTER (Counter Mode)
18.8.1 COPIER
18.8.1.1 Overview
18.8.1.1.1 Outline
The COPIER/COUNTER screen is shown below. The items are described starting on the next page.
<Clearing counter values>
1) Select the item to clear, displaying it in reverse.
2) Press the clear key on the operation panel.
- The counter is cleared, resetting it to "00000000".
<Small size and large size in this mode>
- TOTAL/PICKUP/FEEDER/JAM
Large (L) size: Paper larger than A4, LTR size
Small (S) size: A4, LTR size and smaller paper
- DRBL-1/DRBL-2 (PD-PU-RL, C3-PU-RL, C4-PU-RL)
Large (L) size: Paper longer than 324 mm in the feed direction
Small (S) size: Paper 324 mm or shorter in the feed direction
- DRBL-2 (DF-PU-RL, DF-SP-PD, DF-F-BLT, DF-SP-RL)
Large (L) size: Paper longer than the LTR length (216 mm) in the feed direction
Small (S) size: Paper of the LTR length (216 mm) or shorter in the feed direction
<Reading counters for consumable parts/parts needing periodic replacement>
The copier has special counters (DRBL-1/DRBL-2) that can be used to provide a guideline for when to replace
consumable parts or parts needing periodic replacement.
Small size sheets are counted in increments of 1, large size sheets are counted in increments of 2.
F-18-27
Chapter 18
0006-5189
18-115