Meap Counter - Canon iR C3200 Series Service Manual

Chapter 13

13.2 MEAP Counter

In addition to the commonly found print counters, a device that supports MEAP is equipped with a counter
mechanism used to keep track of which functions are used as well as how often they are used for individual MEAP
applications that are installed. The MEAP counter readings may be checked by making the following selections on
the device control panel: Counter Check Key>MEAP Counter Check. A device may possess the following MEAP
counters, and which counter to use and, therefore, to display all depend on the application in question.
A counter reading may be of a type that is forced to increase as a job is expected or of a type that is increased when
the application sends instructions; or, it may be of a type that increases independently of the host device, thus
increasing solely in response to the application being run; specifics are as follows:
Type
forced
in response to instructions from application
application-independent
13-2
T-13-1
Count item
total
total (black-and-white 1)
total (black-and-while large)
scan (total 1)
black-and-white scan (total 1)
black-and-white scan 1
black-and-white scan 2
black-and-white scan 3
black-and-white scan 4
free 1
free 2
free 3
free 4
free 5
free 6
free 7
free 8
free 9
free 10
free 11
free 12
0007-0359