Jam Code 0108, 0207; 0207 Jam Code: Because Of Deformation Of Internal Delivery Roller - Canon iR C3200 Series Service Manual

Chapter 16

16.3.8.5 JAM CODE 0108, 0207

Symptom
JAM CODE 0108, 0207
Cause
Pins of the connectors in the delivery vertical path unit are bent.
Field Remedy
Because of a bend, there is a possibility that the connectors are not securely connected. Correct the bend if the
pins are bent.
Location of the connectors:
Slide out the Fixing Feeder Ass'y and open the delivery vertical path cover. Remove the delivery internal cover
by unfastening a screw. Two connectors can be seen there.
16.3.8.6 JAM CODE 0207
[ Case in the field ]
Description
This jam code indicates a stationary jam at the fixing delivery sensor (PS25).
Field Remedy
Check whether the fixing delivery sensor (PS25) operates normally in service mode [COPIER>I/O>DC-
CON>P007>bit4]. If any problems are found with the sensor, replace it with a new one (FH7-7312).
* Replacement of the fixing ass'y often solved the problem in the field; however, there are several cases where
toner adhering to the internal delivery roller or pinched wires of delivery vertical path motor caused this
symptom.

16.3.8.7 0207 Jam Code: Because of deformation of internal delivery roller

[ Inspected by Canon Inc. ]
Description
The internal delivery roller was deformed by heat after long use and this degraded its paper delivery capability,
causing a paper jam. As a solution, in order to prevent the roller from being deformed by heat, a new part
"Delivery Cooling Fan Cable" is added and also the rotational sequence of the delivery cooling fan (FM5) is
modified. When this symptom occurs, follow the steps in Field Remedy below. The rotational sequence of the
fan is changed as follows:
- Original sequence:
The fan is off during standby and simplex copy, and rotates at full speed during duplex copy.
- New sequence:
The fan rotates at half speed during standby, and at full speed during simplex and duplex copy.
In addition, the following are starting serial numbers of the machine with the cable:
iR C3200 (120V): MSK23249
iR C3200 (120V): MSL01214
iR C3200 (EUR 230V): UKF03623
iR C3200N (EUR 230V): JAF05213
16-118
0002-3575
0003-8651
0007-9931