F-12-211
2) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the heat exhaust fan unit
[3].
F-12-212
12.5.29 Drum Unit Drive Belt
12.5.29.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
12.5.29.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
12.5.29.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.29.4
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
12.5.29.5 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
0000-5326
0000-5327
Chapter 12
Removing
the
F-12-213
0000-5330
0000-5328
0000-5329
12-65