Chapter 9
When mounting the top plate, check to be sure to fit
the edge of the idler gear [1] after matching it against
the hole [2] in the top plate and the hole [3] in the
bottom plate.
F-9-233
F-9-234
F-9-235
9-90
9.8.15.11
Removing
Feedscrew Rotation Sensor
1) Disconnect the connector [1], and remove the
feedscrew rotation sensor [2].
F-9-236
9.8.16 Tone Container Motor
9.8.16.1 Removing the Waste
Toner Container
1) Open the front cover, and turn the intermediate
transfer unit releasing lever [1] to detach the waste
toner container [2].
F-9-237
the
0000-4612
0006-0803