Canon iR C3200 Series Service Manual page 1084

Chapter 18
18.4.3.1.3 COLOR
LD-OFS-Y/M/C/K
- LD-OFS-Y/M/C/K (Used to adjust low-density color balance.)
Whenever possible, avoid using this setting during normal operation.
MD-OFS-/Y/M/C/K
- MD-OFS-Y/M/C/K (Used to adjust medium-density color balance.)
Whenever possible, avoid using this setting during normal operation. (Recommended setting value: -1)
HD-OFS-Y/M/C/K
- HD-OFS-Y/M/C/K (Used to adjust high-density color balance.)
Whenever possible, avoid using this setting during normal operation. (Recommended setting value: -2)
18.4.3.1.4 HV-PRI
USUB-Y/M/C/KAC
- USUB-Y/M/C/KAC (Used to adjust upstream auxiliary brush charge voltage.)
Whenever possible, avoid using this setting during normal operation.
DIS-TGY/M/C/K
- DIS-TGY/M/C/K (Used to adjust the offset to the target current used in discharge current control (normal paper).)
Whenever possible, avoid using this setting during normal operation.
DIS-TGY2/M2/C2/K2
- DIS-TGY2/M2/C2/K2 (Used to adjust the offset to the target current used in discharge current control (card/special
paper/transparencies).)
Whenever possible, avoid using this setting during normal operation.
18.4.3.1.5 HV-TR
Outline
The adjusted offset doesn't become valid unless all of the following 6 items are entered: 2TR-TGT, 2TR-SHR, TR-
PPR, TR-ENV, TR-CLR and TRDUP.
The settings entered for all 6 items make up a single pattern. 8 patterns can be stored in memory.
2TR-TGT1/2/3/4/5/6/7/8
- 2TR-TGT1/2/3/4/5/6/7/8 (Used to adjust the offset to the secondary transfer target current.)
Adjustment range: -5 to +5 (2 µA units) (Value at time of factory shipment/value after
RAM clear: 0)
Increasing the setting value: Effective for images with toner spatter/water droplets.
Decreasing the setting value: Effective for images with white marks, white blotches,
rough-textured half-tones.
2TR-SHR1/2/3/4/5/6/7/8
- 2TR-SHR1/2/3/4/5/6/7/8 (Used to adjust the offset to the secondary transfer paper-portion voltage.)
Adjustment range: -5 to +5 (100 V units) (Value at time of factory shipment/value after RAM clear: 0)
Increasing the setting value: Effective for images with toner spatter/water droplets.
Decreasing the setting value: Effective for images with white marks, white blotches, rough-textured half-tones.
18-78
0001-2382
0006-0885
0006-0888
0001-2384
0006-0890
0006-0892
0001-2385
0006-0896
0006-0898