Canon iR C3200 Series Service Manual page 359

3) Free the controller box from the hook [A/B] at the
top of the main controller box.
F-9-124
4) Engage the hook [1] found on the right side of the
main controller box on the stay [2] of the machine,
and open it.
F-9-125
9.8.5.7 Removing
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
the DC
0006-7744
F-9-126
9.8.5.8 Removing
Developing Motor (Y/M/C)
1) Remove the 2 screws [1], and detach the main
controller base [2].
F-9-127
2) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the developer motor [3]
(starting at the right, Y, M, and C in sequence).
F-9-128
Chapter 9
the
0000-4572
9-67