Removing The Dc Controller Pcb Cover - Canon iR C3200 Series Service Manual

F-9-200
9.8.13.6 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
F-9-201
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
9.8.13.7 Opening the Main
Controller Box
1) Remove the 2 flat cables [1] used to connect the DC
controller PCB and the main controller PCB.
0000-4586
2) Remove the 9 screws [1] of the main controller box.
[1]
F-9-202
F-9-203
F-9-204
Chapter 9
0000-4587
9-83