F-5-48
5.7.5 Ethernet Board
5.7.5.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
5.7.5.2
Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
5.7.5.3
Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
0000-4343
0000-4344
the
0000-4345
F-5-49
5.7.5.4 Removing the Ethernet
Board
1) Remove the 2 screws [1], and detach the Ethernet
board [2] together with its mounting plate.
F-5-50
2) Removing the 2 screws [1], and detach the Ethernet
board [3] from the mounting plate [2].
Chapter 5
0000-4346
5-33