Removing The Main Power Supply Switch - Canon iR C3200 Series Service Manual

Chapter 12
F-12-141
12.5.20.13 Removing the Main
Power Supply Switch
1) Remove the 2 terminals [1].
F-12-142
2) Pick the stopper segment [A], and detach it.
F-12-143
12-48
12.5.21 Manual Feed Unit Open/
Closed Detecting Switch
12.5.21.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
12.5.21.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
12.5.21.3 Removing the Left
0000-5204
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.21.4
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
Removing the
F-12-144
0000-5236
0000-5237
0000-5240
0000-5238