Developing Motor (Y/M/C) - Canon iR C3200 Series Service Manual

9.8.4.7 Removing
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
F-9-116
9.8.4.8
Removing
Developing Motor (Bk)
1) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the developer motor
(Bk) [3].
F-9-117
the DC
0000-4579
the
0000-4580

9.8.5 Developing Motor (Y/M/C)

9.8.5.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
9.8.5.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
9.8.5.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
9.8.5.4 Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-9-118
Chapter 9
0006-7767
0006-7772
0006-7716
the
0000-4568
9-65