Removing The Left Upper Rear Cover; Removing The Dc Controller Pcb Cover - Canon iR C3200 Series Service Manual

10.10.5.2 Removing
Separation Roller
1) Put your hand through the front of the machine;
then, pick the tab [A] of the separation roller [1],
and pull it out.
F-10-41
10.10.6 Cassette Pickup Motor
10.10.6.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
10.10.6.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
10.10.6.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
10.10.6.4 Removing the DC
Power Supply Unit
1) Remove the 2 screws [1], and disconnect all
connectors of the fuse PCB; then, detach the DC
power supply unit [2].
the
0000-4717
0006-7771
0000-4758
0000-4762
0000-4759
F-10-42
10.10.6.5 Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-10-43
10.10.6.6 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
Chapter 10
the
0000-4760
0000-4761
10-39