Canon iR C3200 Series Service Manual page 996

Chapter 17
Code
17-16
Detail Description
0003
0004
0005
0006
0007
01XX
02XX
03XX
04XX
05XX
06XX
07XX
08XX
09XX
Timing of detection
The fault is a HD write/abort error.
The machine fails to read sectors of
the HD.
At power-on, an error is detected as
part of a check made on the control
table for "image storage area." (Re-
install the system software, or
replace the HDD.)
It is a fault in the detection of the
HD controller IC. It is detected
when the HD controller IC cannot
be recognized or an error is detected
in it.
The auxiliary startup file is absent.
The correct SUB CPU program
does not exist on the HD or in
BOOTDEV/BOOT or the like.
The color profile file does not exist.
The correct color profile file does
not exist in BOOTDEV/PDL or the
like.
The partition DOSDEV is faulty.
(For detail code, see below.)
The partition FSTDEV is faulty.
(For detail code, see below.)
The partition DOSDEV2 is faulty.
(For detail code, see below.)
The partition FSTPDEV is faulty.
(For detail code, see below.)
The partition DOSDEV3 is faulty.
(For detail code, see below.)
The partition PDLDEV is faulty.
(For detail code, see below.)
The partition DOSDEV4 is faulty.
(For detail code, see below.)
The partition BOOTDEV is faulty.
(For detail code, see below.)
The partition DOSDEV5 is faulty.
(For detail code, see below.)