Original Cover Sensor; Removing The Reader Rear Cover; Removing The Copyboard Cover Open/Closed Sensor Mounting; Removing The Copyboard Cover Open/Closed Sensor - Canon iR C3200 Series Service Manual

Chapter 6
F-6-73
Points to Note After Mounting the Scanner Motor
When you have mounted the motor, either move the
mirror or make a test print (so as to be sure that the
motor belt is correctly placed).

6.4.9 Original Cover Sensor

6.4.9.1 Removing the Reader
Rear Cover
1) Remove the 2 cable clamps [1] to free the reader
power cable.
F-6-74
2) Disconnect the reader controller communications
cable.
3) Remove the 7 screws [1], and detach the reader rear
cover [2].
6-28
6.4.9.2
1) Remove the 2 screws [1], and detach the sensor
0000-4404
[1]
F-6-75
Removing
Copyboard Cover
Closed Sensor Mounting
base [2].
F-6-76
the
Open/
0006-7327