Removing The Lattice Connector Mounting - Canon iR C3200 Series Service Manual

9.8.1.11 Removing
Developing Drive Unit
1) Disconnect the connector [2] of the developing
motor [1], and free the harness [3] from the cable
clamp [4].
F-9-56
2) Remove the 2 screws [1], and detach the main
controller base [2].
F-9-57
3) Remove the 7 screws [1], and detach the
developing drive assembly [2].
the
0000-4624
F-9-58
9.8.1.12 Removing the Lattice
Connector Mounting
1) Remove the 2 screws [1], and disconnect all
connectors; then, detach the lattice connector
Mounting [2].
F-9-59
Chapter 9
0000-4625
9-51