5.7
Parts
Procedure
5.7.1 Main Controller PCB (main)
5.7.1.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
5.7.1.2
Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
5.7.1.3
Removing
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
F-5-20
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
Replacement
0000-4303
0000-4308
the
DC
0000-4309
[1]
F-5-21
5.7.1.4
Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-5-22
Chapter 5
the
0000-4310
5-25