Removing The Left Upper Rear Cover - Canon iR C3200 Series Service Manual

Chapter 12
12.5.24.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.24.4
Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-12-166
12.5.24.5 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
12-54
0000-5249
the
0000-5247
0000-5248
F-12-167
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
[1]
F-12-168
12.5.24.6 Opening the Main
Controller Box
1) Remove the 2 flat cables [1] used to connect the DC
controller PCB and the main controller PCB.
0000-5250