Canon iR C3200 Series Service Manual page 555

F-10-513
9) Using 4 screws, secure the delivery vertical path
unit [3] in place; then, connect the 3 connectors. At
this time, check to make sure that the machine
positioner [4] is properly in place.
F-10-514
10) Mount the new delivery vertical path cover [1] to
the machine; then, fix the delivery inside cover [2]
in place using a screw [3].
F-10-515
11) Fix the upper left cover [1] using 2 screws [2];
then, close the delivery vertical path cover [3], and
put the fixing/feeding unit back in its initial
position.
F-10-516
10.10.47.5
Removing
Center Delivery Tray Full
sensor
1) Remove the sensor flag [1]; then, disconnect the
connector [2], and detach the center delivery tray
full sensor [3].
F-10-517
Chapter 10
the
0000-4865
10-149