Chapter 9
F-9-177
3) Be sure that the spring [1] is securely fitted to the
back of the tab used to remove/attach the roller.
Pay attention to the orientation of the spring, as
different types are used between front and rear.
F-9-178
9.8.12 Secondary Transfer Internal
Roller
9.8.12.1 Pressure Release of the
Intermediate Transfer Unit
1) Open the front cover, and turn the intermediate
transfer unit releasing lever to unlock it.
2) Slide out the manual feed unit.
3) Remove the screw [1], and detach the middle right
9-78
cover [2].
4) Release the escape lever [1].
9.8.12.2
Intermediate Transfer Unit
1) While picking the tabs at the front and the rear,
slide out the intermediate transfer unit [1]; then,
detach it by holding it by the indicated area [2].
0000-4654
F-9-179
F-9-180
Removing
the
F-9-181
0000-4657