Chapter 14
14.3 Scheduled Servicing Basic Procedure
14.3.1 Scheduled Servicing (Reader Unit)
Do not use solvents or oils that are not indicated herein.
Unit name
Optical assembly
Optical path
Points to Note About Scheduled Servicing
Unless otherwise specifically mentioned, use lint-free paper and alcohol for cleaning.
- If you used solvent for cleaning, be sure that the solvent has completely dried before mounting the part back to the
machine.
- Unless specifically mentioned, do not use a wet (moist) cloth for cleaning.
- See to it that scheduled servicing and replacement are conducted as indicated.
14-4
T-14-2
Location
Cleaning
Scanner cable
inspect
Scanner rail
lubricate
Copyboard glass
clean
No. 1 through No. 3
clean
mirrors
Original reflecting plate
clean
Original size sensor
clean
Lens
clean
Remarks
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
if dirt is appreciable
0006-0013