Removing The - Canon iR C3200 Series Service Manual

Chapter 9
9.8.3.3 Removing
Intermediate Transfer Belt
1) Remove the 4 screws [1], and detach the belt cover
[2].
F-9-93
2) Remove the screw [1], and detach the varistor [2].
F-9-94
3) Remove the screw [1], and detach the transfer guide
plate [2].
F-9-95
9-60
the
0000-4528
4) Remove the 4 screws [1] at the rear, and pull out the
link plate (rear) [2].
F-9-96
5) Fit the boss [1] on the frame at the rear into the
recess [A] in the middle right cover so that the unit
is upright.
F-9-97
6) Be sure that the rear link plate [1] is on the opposite
of the middle right cover so that the intermediate
transfer unit will not fall down.
F-9-98