Error Code; E001 Error Code Detail The Fixing Unit Is Overheating - Canon iR C3200 Series Service Manual

Hide thumbs Also See for iR C3200 Series:

Table of Contents

16.3.10 Error Code

16.3.10.1 E000 Error code detail The rise in temperature in the fixing unit at time

of power-on is inadequate.

E000 The rise in temperature in the fixing unit at time of power-on is inadequate. (Error code detail)

E001 The fixing unit is overheating. (Error code detail)

After power-on, the output of the noncontact

thermistor does not reach 40°C within 180 sec.

The high-temperature detection port ontinues to remain ON

for 500 msec.

The reading of the no-contact thermistor remains 250°C for

The difference in temperature between the non-contact

thermistor and the end thermistor remains 80°C or more for

At the end of initial rotation, the difference in temperature

between the sub (end) thermistor and the main (non-

contact)thermistor is 20°C or more for 100 msec.

(A reversal in temperature (caused, for

example, by a piece of residual paper) is detected.)

Timing of detection

Timing of detection

Show Quick Links

Table of Contents

Do you have a question about the iR C3200 Series and is the answer not in the manual?

Ir c3220n prt