Chapter 12
F-12-36
2) Remove the 2 screws [1], and detach the main
controller base [2].
F-12-37
3) Remove the 7 screws [1], and detach the
developing drive assembly [2].
F-12-38
12-22
12.5.3 High-Voltage Unit
12.5.3.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
12.5.3.2 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
12.5.3.3 Removing the High-
Voltage Unit
1) Disconnect all connectors of the high-voltage unit;
then, remove the 5 screws [1], and detach the high-
voltage unit [2].
F-12-39
2) Remove the 6 screws [1], and remove the base plate
[2]; then, detach the high-voltage unit [3].
0000-5138
0000-5139
0000-5140