Reception Problem - Canon iR C3200 Series Service Manual

the recipient server because it would be relayed via multiple servers.
Remedy 1: Confirm that the recipient has received it.
Remedy 2: Check if you have received an error notification.
Cause
The # 899 proves that the iR C3200 itself has sent the mail successfully.
In the Simple mode for iFax or email, iR C3200 is responsible for sending out data from its SMTP server but is not
responsible for tracing further transmission pathway to the recipient's mail server. Thus, it cannot judge if the
recipient can receive the data properly. In this sense, iR C3200 displays the # 899 to notify that it has sent data out
from the SMTP server successfully.
Field Remedy
Please explain the users the meaning of the # 899.
Remarks
This code appears when data is transmitted in Canon FTP with iW Gateway.

16.3.7.2 Reception Problem

16.3.7.2.1 Faint lines in the main scanning direction at about 1mm intervals: on FAX received image
Symptom
Faint lines in the main scanning direction at about 1mm intervals: on FAX received image
Description
This symptom does not occur on copied images.
Cause
As a result of inspection, the main controller PCB was found to be faulty.
Field Remedy
Replace the main controller PCB with a new one.
16.3.7.2.2 iRC3200 displays 'Printing' after FAX reception and does not output RX documents
[ Case in the field ]
< Field Remedy >
In the field, this symptom occurred because the Main Controller PCB (Main) was faulty. Unplug and reinsert
the connectors on it. If the symptom still recurs, replace it with a new one.
Main Controller PCB (Main): FG3-2854
Chapter 16
0002-4748
0005-6100
16-115